|
View our SpaGuard Spa Chemicals!
Stop in at DJ'S and have your
Spa/Pool Water tested for chemicals.
DJ'S uses Accu-Scan 2 which is a highly accurate,
electronic strip-reading device. Here is how it works. When you expose a
test strip to sample Spa/Pool water, there is a chemical reaction. The
unit "reads" the colors that occur due to this reaction, and reports the results
to the unit's software program. Comprehensive testing can be done in as
little as 180 seconds!
We at DJ'S are happy to provide
this FREE service to our
regular chemical purchasing customers. If you do not purchase chemicals, the
testing cost would be $15.00, but please remember the water test we do
here in our stores is only good for the water we have just tested. To help
assure that your Spa/Pool is safe to use 24 hours a
day, you must do your own testing at home and you must learn what chemicals are
required based on the testing you do at home.
We encourage you to bring
in a water sample from you newly refilled Hot Tub or Spa. The most accurate
water sample will come from the water taken out of
your refilled spa and not from your hose bib or tap. We want
to test the brand new fill
water once it has mixed with what ever water
was left in you spa pipes. For swimming pools take your
water sample away from an inlet and at a depth of about 18" below the surface.
Protect your water sample from
freezing or baking in the sun and get it to us as soon as you can. The
better the
sample collecting you do the more accurate a result
you will have.
Don't take a chance with your
Spa/Pool, make sure you test electronically.
Stop in with your water and see
the difference!
View our SpaGuard Spa Chemicals!
|
