HEATING, COOLING
FIREPLACE, & SPA

E-MAIL! DJS@DJSONLINE.COM

WEEKEND CUSTOMER?! CONTACT US 9AM-5PM 612-290-8161

OUT OF THE TWIN CITIES METRO AREA? 1-800-428-1431   QUICK QUESTION? TEXT AT 612-685-5286 QUICK ANSWER!

BOBCAT
HIGH PERFORMANCE CONDENSING GAS BOILER

COMPACT, SLEEK AND POWERFUL, BOBCAT PROVIDES 93% ANNUAL FUEL UTILIZATION EFFICIENCY (AFUE) RESULTING IN SIGNIFICANT FUEL SAVINGS.  ALUMINUM HEAT TRANSFER PLATES AND TUBULAR WATERWAYS ARE CORROSION-RESISTANT AND HEAT UP QUICKLY.  SLANT FIN BOBCAT IS EASY TO HANDLE AND CAN BE INSTALLED FLOOR STANDING OR WALL MOUNTED.

STANDARD EQUIPMENT

PRE-ASSEMBLED ALUM JACKET	PRESSURE GAUGE
PRE-ASSEMBLED ALUM EXCHANGER	PRESSURE RELIEF VALVE
WOVEN METAL FIBER PRE-MIX BURNER	HIGH HEAD CIRCULATOR FOR PRIMARY LOOP
BLOWER, GAS VALVE AND VENTURI	DRAIN COCK
INTEGRATED CONTROL W/BUILT IN DIAGNOSTICS AND DISPLAY	BUILT-IN CONDENSATE DRAIN & TRAP
OUTDOOR RESET CONTROL	VENT & AIR INTAKE TERMINAL
DIRECT SPARK IGNITION SYSTEM	NAT GAS - LP AVAILABLE

A MAJOR ACHIEVEMENT IN SEALED COMBUSTION, CONDENSING BOILER EVOLUTION!

• HIGH EFFICIENCY 93% AFUE

• ADVANCED DESIGN LONG LIFE ALUMINUM HEAT EXCHANGER. LARGE DIAMETER WATERWAYS HELP PREVENT PLUGGING

• 2 MODELS: 4:1 MODULATION PROVIDES INPUT RANGE OF 30.000 TO 120.000 BTUH & 50.000 TO 200.000BTUH

• QUIET OPERATION

• 12 YEAR LIMITED WARRANTY WITH 5 YEAR PARTS WARRANTY

• FLOOR STANDING OR WALL HUNG

• NAT OR LP GAS

• PVC/CPVC OR STAINLESS STEEL VENT PIPE UP TO 100' EQUIVALENT LENGTH

• ALL CONNECTIONS ON TOP

• LOW NOX -- FRIENDLY TO THE ENVIRONMENT

• IDEAL FOR RADIANT, BASEBOARD, DHW OR MIXED APPLICATIONS.

DOWNLOADS

DIMENSIONS

BROCHURE

2 SIZES AVAILABLE 

B-120A $3347.00

B-200A $4835.00

• Reliable technology
  Low mass design. The Bobcat boiler utilizes an advanced low mass heat exchanger design that makes it highly reliable and robust. Bobcat’s patented 14-pass continuous flow design, with 1-inch water passages, helps maintain better velocity, prevent plugging and virtually eliminates risk of flashing into steam.

• Knitted metal fiber burner
  Designed specifically for high efficiency condensing boiler applications, ensures extremely low emissions and full modulation. The burner’s metallic composition enhances the flame detection signal for reliable performance. The boiler utilizes a reliable spark ignition system.

• Modulation reduces wasteful cycling, maximizes fuel savings
  Just as stop and go driving wastes fuel, so does on and off cycling of your boiler.  On very cold days your boiler may operate continuously to heat your home.  However, on warmer days, an ordinary boiler with unchanging output will repeatedly turn its burner on and off. This puts out lots of BTUs for short periods of time, wasting  fuel with every new ignition. On warmer days, the Bobcat automatically reduces its BTU input using a proper lower level of fuel consumption. This reduces cycling dramatically. In addition, the heat exchanger enters the condensing mode. Here, the Bobcat maximizes heat extraction from the combustion process and significantly reduces your fuel bills.

• Microprocessor manages boiler performance
  With information it receives from an outdoor sensor, room thermostat, flame sensor  and other devices on the boiler the control monitors boiler performance and controls temperatures and the sequence of operation. It can also control the domestic hot water temperatures, output and fuel saving modes. LED readout on the control panel displays current conditions, set-up details and diagnostic information.

• Sealed combustion offers added economies and safety
  The Bobcat boiler operates in total isolation from household air. The combustion process is “sealed” inside the boiler, with intake air and exhaust pipes connected directly to the outdoors. However, when the alternative non-direct venting method is chosen, inside air is used for combustion.

• Easy, smooth installation- almost anywhere in house
  The lightweight Bobcat boiler is designed for easy handling and speedy installation. The shipping crate lifts right off and built-in lifting ports on the boiler assist in moving it from skid to floor or wall mount location. Other Bobcat boiler features include top connections for water, gas, vent and electric. PVC, CPVC or stainless steel pipe can be used for intake and exhaust. 100 feet of equivalent length pipe can be used, allows you to install boiler almost anywhere. Quick seal vent pipe connections ensure easy positive seal.