E-MAIL DJS NOW!

DJS@DJSONLINE.COM

DJS COMPANIES
HEATING, AIR CONDITIONING, FIREPLACE, & HOT TUBS
SERVING THE TWIN CITIES SINCE 1971!
 SALES   INSTALLATION   SERVICE   PARTS

1-800-428-1431

 


DJ SAYS
"YOU ALWAYS
GET A GREAT DEAL AT DJS"

WEEKEND SALES
CALL NOW! 612-290-8161

DJS EBAY STORE

QUICK QUESTION?
TEXT AT 612-685-5286
QUICK ANSWER!

ALBERTVILLE
CLICK FOR SHOWROOM HOURS
763-497-2661
ELK RIVER
CLICK FOR SHOWROOM HOURS
763-497-6858
MONTICELLO
CLICK FOR SHOWROOM HOURS
763-497-6859

Garage Heaters > Modine Hot Dawg Garage Heaters

MODINE HOT DAWG HD & HDS GARAGE HEATERS

Modine garage heaters
Modine garage heaters

MODINE HOT DAWG POWER-EXHAUSTED,
GAS -FIRED UNIT HEATER (MODEL HD)

  - HUSH PUPPY QUIET OPERATION
  -
USES NAT OR PROPANE GAS
  - LOW-PROFILE DESIGN AND NEUTRAL COLOR TO BLEND IN  WITH DECOR
  - LIGHTWEIGHT, EASILY INSTALLS 1" FROM CEILING WITH ONLY 2 ANGLE BRACKETS.
  - INSTALLS QUICKLY WITH FIELD WIRING
  - FULL 10 YEAR WARRANTY ON HEAT EXCHANGER
  - RIGHT OR LEFT HAND CONTROLS AVAILABLE ON ALL 30/75 UNITS.
  - PERMANENTLY-LUBRICATED MOTOR FOR TROUBLE-FREE DEPENDABILITY

Modine garage heaters

(DOWNLOAD) HD SPECIFICATION SHEET
(DOWNLOAD) OWNER/INSTALLATION MANUAL

 
(DOWNLOAD) BROCHURE

 
GARAGE HEATERS REPLACEMENT PARTS SEALED COMBUSTION

   SERVICE


The
Modine Hot Dawg HD model propeller gas-fired unit heaters offer versatility design for right or left-hand piping and installation. The Modine Hot Dawg is Lightweight, easily installs from the ceiling with only 2 angle brackets (included). Sealed, permanently-lubricated motor for trouble-free dependability.  Full 10 year warranty on heat exchanger and 2 year on all parts. A propeller fan type heater is the logical choice for most unit heater applications.  Designed for venting through the side wall, this Modine heater requires only 3" Stainless Steel venting (horizontal) or a 4" Class B venting (vertically) and needs connection to gas and electric service lines to place it in operation.
 

Modine garage heaters

MODINE HEATERS
PERFECT FOR HEATING THAT GARAGE!!

FREE Shipping on HD30 & HD45

                                                            


VENTING AND ACCESSORIES
HORIZONTAL VENTING REQUIRES 3" CATEGORY III VENTING

IF VENTING VERTICAL - CATEGORY I  4" VENTING CAN BE USED - 4" VENT KIT BELOW ARE IN STOCK!
 

 

Unit Side Clearance to Combustible Materials Recommended Service Clearance
Top & Bottom 1" 1"
Access Side 18" 18"
Non-Access Side 1" 1"
Rear 18" 18"
Vent Connector 4" 4"



Modine garage heaters

MODINE  LOW PROFILE SEPARATED COMBUSTION UNIT HEATER - THE "HOT DAWG"

         

         **Must Purchase either a Horizontal or Vertical "Vent Kit"


The
Separated Combustion Modine HDS Hot Dawg model draws its combustion air from outside to ensure that the unit will always have plenty of fresh, clean air to breath.  This fresh-air supply reduces common concerns about dusty, dirty or humid applications.  In addition, by drawing the combustion air from the outside, the overall heating efficiency is increased.  In short, the Hot Dawg separated combustion unit gives you the added advantages of:

  • Less Maintenance in dusty environments

  • Improved efficiency by using outside air for combustion

  • Greater durability in hostile environments (environments possessing substances that may deteriorate
    the performance of the unit)

  • External thermostat and gas connections

  • Quiet Operation

  • Uses Natural or Propane Gas

  • Certified for residential, commercial and industry use

  • Low-Profile design and neutral color to blend in with decor

  • Lightweight, easily installs 1" from ceiling with only 2 brackets (included)

  • Install quickly and easily with field wiring connections and knockouts for quick access to gas and electricity

  • Standard power exhaust simplifies side-wall or roof venting with small-diameter vent pipe.

  • Versatile design allows for right or left hand controls and installation.  Gas, electrical and flue connections
    can be changed from one side to the other by simply flipping the Hot Dawg over.

  • Permanently-lubricated motor for trouble-free dependability.

  • Full 10 year warranty on the heat exchanger and 2 year on all the parts.   

HEATER

 BTU/Hr INPUT

 BTU/Hr OUTPUT

VENT SIZE

OVER THE COUNTER

SHIPPED PRICE 

APPLICATION

ORDER!

LP CONVERSION KIT HDS100A   LP KITS ARE FOR SPARK IGNITION MODELS ONLY

 

     
THERMOSTAT Honeywell Non-Programmable Digital Thermostat Focus Pro 5000 TH5110D1006
40-90 Degrees
      MORE INFORMATION        
THERMOSTAT Pro1IAQ T771 Single Stage 1 Heat Only or 1 Cool Only

Low Setpoint range down to 25 degrees!

  MORE INFORMATION        

THERMOSTAT LuxPro PSD010B
Heating 45-90 Degrees
       MORE INFORMATION        



 COPYRIGHT 2016 DJS ONLINE. ALL RIGHTS RESERVED

ABOUT US | BROCHURES | CONTACTS | CUSTOMER SUPPORT | DJS ADS | FINANCING | PARTS | REBATESSECURITY ISSUES | SERVICE
SHIPPING PRODUCTS | SHOWROOM LOCATIONS |
SHIPPING OPTIONS | TERMS & CONDITIONS | TESTIMONIALS | SITE MAP | SECURITY
 


Send E-Mail to djs@djsonline.com with questions or comments about this web site.  Site Map