|
|
HEATING &
FIREPLACES ON DISPLAY!
|
|
|
ECO-heaters
offer out-of-the-way wall mounting and is an economic way of providing
efficient room heating at a low cost. Using convection technology, heat is
mainly generated behind the heater in the space between the panel and the
wall, which leads to an efficient up-draft of heat circulated into the room.
This principle of convection means that about 90% of the heat comes from the
back of the panel, while only 10% is radiated from the front of the panel.
This form of "background" heating is not only very economic, but also safe
and efficient. (DOWNLOAD) COMPLETE BROCHURE (DOWNLOAD) ECO HEATER FLYERDJS BEST PRICE OF $129.99 FEDEX SHIPPING OF $10.00 |
ECO-heaters are designed to be left on for long periods of time. ECO-heaters operate at a relatively low surface temperature. Although the heater is hot to touch, it will not burn the skin if touched. It is always good practice, however to keep an eye on infants when they are near any type of heater. The top concerns with heater safety are the possibility of a fire. ECO-heaters have no exposed elements or areas for dust accumulation, therefore, the risk of fire is almost nil
|
| - Color: Neutral White (Can be painted to match any wall color) |
| - Weight: 15 lbs (in packaging) |
| - Size: 23 1/4" x 23 1/4" x 3/8" |
| - Power: 400 watts @ 3.3 amps |
| - Outlet: 120 volt U.S. outlet (6 ft. power cord) |
| - ECO-heaters
are designed to be quickly and easily installed following the instructions
given with every panel and using the mounting kit provided. Installation
time is less than 10 minutes per panel. Use the holes provided in the
lightweight polystyrene packing OR the heater itself as a template to mark
the position of the four holes on the wall (ensuring that the template is
level) and then drill the holes using an 8mm masonry drill bit. For best
results, ECO-Heater wall panel heaters should be mounted
approximately 150mm (6 inches) above floor/skirting board and away from
windows and doors. |
|
|
|
|
|