|
|
|
|
|
Electric Products Featuring the "The Hot One"
Product Dimensions:
|
RCP402S Model 13,648/9,100 BTU'S
Shipped Price of $299.00
RCP502S Model 17,060/11,372 BTU'S
Shipped Price of $399.00
|
![]()

|
The Hot One 240 Volt portable heater is designed with the same rugged construction as Cadet’s commercial unit heater line. It provides warmth for large areas that are often difficult to heat, like garages and workshops. The fan delay mechanism, standard on all units, allows the element to heat before blowing air, thereby eliminating cold startups. It also delays the shutdown of the fan after the element turns off to disperse residual heat. The Hot One comes factory equipped with a bracket for either wall mount or floor stand use (non-marking rubber pads are included on the mounting bracket). The area must be equipped with an accessible 240 Volt receptacle. Standard Features
Architectural Specifications Portable fan unit heater shall be UL and C-UL Listed and rated at 240 Volt. External cabinet shall be constructed of 20 gauge high quality steel and shall be finished with a baked on powder coat paint. Fan shall be aluminum blade axial flow type, and mounted directly to the motor shaft. Motor shall be shaded pole and industrial rated. Heating elements shall be sealed in magnesium powder and protected by metal sheathing and aluminum fins. Heater shall be equipped with manual reset thermal cut out for over temperature protection. Fan motor circuits shall be thermostatically controlled with fan delay. Technical Information
Ordering Information |
| HEATER |
WATTS HIGH/LOW |
AMPS HIGH/LOW |
BTU'S HIGH/LOW |
HEIGHT |
WIDTH |
DEPTH |
|
Order Heater |
| RCP402S | 4000/2667 | 16.7/11.1 | 13,648/9,100 | 17 1/2 | 15 3/4 | 8 1/4 | $299.00 | Order Heater |
| RCP502S | 5000/3333 | 20.8/13.9 | 17,060/11,372 | 17 1/2 | 15 3/4 | 8 1/4 | $399.00 | Order Heater |
The models will shipped to via UPS