BUFFALO
SHOWROOM
763-682-5950

ELK RIVER SHOWROOM
DJS CUSTOM CABINETS

763-421-5313

6060 LABEAUX AVENUE ALBERTVILLE, MN 55301
LOCAL 763-497-2661     OUTSTATE 1-800-428-1431  

OSSEO SHOWROOM
763-493-2355


WAYZATA SHOWROOM

952-473-7300

ABOUT US    ADS   CLEARANCE   CONTACTS   DJS CARES!   FINANCING   INSTALL/SERVICE   REBATES   SHIPPING   PARTS
LOCATIONS & HOURS      PHOTOS
        E-MAIL DJS@DJSONLINE.COM      PRODUCT PAGE        DIRECTIONS

Click on the Air Conditioning Accessory for more Information

Refrigeration Linesets

Outside Perma Pads

Silver Solder Stick

Thumb Gum Pack

Sheet Metal Materials

Drain Parts

Electrical Parts

Thermostats

Anything you need for Air Conditioning Installation we will have.

 

Refrigeration Linesets from Cambridge.

Air Conditioning Lineset is also known as refrigerant lines, they are used in a split (an indoor furnace or blower and an outdoor condensing unit) cooling system to supply and return refrigerant between the outdoor condenser and the indoor coil. An air conditioning  lineset consists of a smaller liquid line and a larger insulated suction line.

20' - 30' - 50' Linesets Available

612 Lineset 20' = $89.99
612 Lineset 30' = $149.99
612 Lineset 50' = $189.99
614 Lineset 20' = N/A
614 Lineset 30' = $179.99
614 Lineset 50' = $249.99
618 Lineset 50' Only $309.99

Lineset Clamps  $.49 per clamp

Contact Us to Order or with any Questions

Go to the Top


Outside Perma-Pads. Level the outdoor Condenser with a Perma Pad

Air Conditioning Perma Pads are 2" thick and in Gray Color.

24"x24" -  32"x32" -  36"x36" Perma Pads Available

24x24 Perma Pad  = $19.99   32x32 Perma Pad = $34.99 36x36 = $39.99  

Contact Us to Order or with any Questions

Go to the Top


Stick of Silver Solder

Use this Silver Solder to weld the lineset to the indoor coil and the outdoor condenser.  Do not use Soft Solder because welds will leak!

$4.99 per Stick.  1-2 Sticks should all that is required.

 Contact Us to Order or with any Questions

Go to the Top


Pack of Thumb Gum

Install this "play dough" type gum around the cut out holes into the plenum for the lineset and drain line.

$3.29 - 1 Pack is all that is needed 

 Contact Us to Order or with any Questions

Go to the Top


Sheet Metal Materials

Plenum Cover used to cover the hole cut open to install the a-coil.  This will give the plenum a finished off look. - $7.99

Sheet Metal Mounting Angles - $1.49 per angle. 4 per install

 Contact Us to Order or with any Questions

Go to the Top


Drain Parts

Drain Fitting 3/4" male screws into the a-coil and then you will hook the 3/4" drain line plastic tubing to it. - $1.49

3/4" Drain line is needed to run from the indoor a-coil to a drain close to the furnace. $1.00 per foot

Drain Plug to plug the other hole in the a-coil - $1.19

Drain Line 90 Degree Elbow - $1.49

 Contact Us to Order or with any Questions

Go to the Top


Electrical Components Needed

  • The electrical wire itself is a 10-2 Romax Wire either comes in 25' or 50' lengths. 25' is $34.99 and the 50' is $59.99

  • Low Voltage electrical wire 2 Strand thermostat wire $.19 per foot.     4  Strand wire $.39 per foot.

  • Electrical Whip.  This will be installed from the disconnect box to outdoor condenser.  Price for a 6' whip is $17.99 

  • Disconnect box.  Mount next to the outdoor unit provides a way to turn off power for servicing.  You will run power from electrical panel to this box. Price for a 30 Amp disconnect box is $17.99.

  • Interchangeable Circuit Breaker.   This breaker is UL Classified for use in the following manufactures' load centers:.

Westinghouse Challenger Murray
     
General Electric Siemens Thomas & Betts

30 Amp - Double Pole 1" Format

Price on the Breaker $17.99

Contact Us to Order or with any Questions

Go to the Top

 

 

Send E-Mail to djs@djsonline.com with questions or comments about this web site.
Last modified: May 16, 2008